Fiberglass Products For Continuous Profiles

Pultrusion Process

The rovings, mats or other fabrics are pulled through a resin impregnation bath and then into a heated die using a continous pulling device. The final products are formed under high temperatureand high pressure conditions.

Rovings for Pultrusion

Rovings for Pultrusion are compatible with UP, EP , VE and PF resins and widely used inbuilding & construction, telecommunication and insulation industries.

Product Model/Features

Product Code	Product Features	Typical Application
276	Assembled roving, low filament diameter, goodcompatibility with resin, fast and complete wet-out, excellent mechanical properties	Pultrusion profiles foroutdoor sports equipment
310H	Assembled roving, good compatibility with resin,fast and complete wet-out, excellent electrical insulation and mechanical properties	Electrical insulation rods
312	good compatibility with resin, fast and complete penetration	Pultrusion profiles
312T	Direct roving, good compatibility with resins, excellentmechanical properties of composite products	Sucker rod,high end pultrusion profile
316H	Direct roving, compatible with matrix resin,high tensile strength of composite products	Optic cables
332	Direct roving, low fuzz, good compatibility withpolyurethane resin, good wet-out, excellentmechanical properties	Various pultrusion profilestelegraph pole, etc
386T	Direct roving, compatible with matrix resin, fast wet-out.excellent mechanical properties of composite products	Various sectional bars andoptic cables
386H	Direct roving, soft strand, good compatibility withresin, fast wet-out,excellent mechanical properties	Various sectional bars

End-Use Markets

(Sports and Leisure/Consumer Goods and Business Equipment/Infrastructure/Automotive/Electrical and Electronics)

Continuous Panel Molding Process

A resin mix is uniformly deposited in a controlled amount onto amoving film at aconstant speed. The thickness of the resin is controlled by the draw-knife.Fiberglass roving is chopped anduniformly distributed onto the resin. Then a top film is applied forminga sandwich structure. The wet assembly travels through a curing oven to form the composite panel.

Assembled Panel Rovings

Assembled Panel Rovings are coated with a silane-based sizing and compatible with UP and acrylic resins. They can fast wet-out in resin and deliver excellent dispersion after chopping.

Product Model/Features

Product Code	Product Features	Typical Application
838	Low static, fast wet-out, no white fibers	General purpose transparentFRP panels
872	Extremely fast wet-out, no white fibers, superior transparency	High transparency FRP panels
872S	Low static, moderate wet-out, excellent dispersion afterchopping under low tension	Semitransparent and opaque FRP panels

Powder Chopped Strand Mats

Powder Chopped Strand Mats are made of randomly distributed chopped strands held together by a powder binder. They are compatible with UP, VE, EP and PF resins. The roll width ranges from 200mm to 3,120mm, Additional demands on wet-out and decomposition time may be available upon request.

Product Model/Features

Product Code	Product Features
P02	High tensile strength, good processing, suitable for use insemitransparent and opaque FRP panels
P30	Fast wet-out, suitable for use in high translucent panels